1. Shade Shape & Photo

Upload Your Photo (JPG, PNG, WebP)

Automatically masked to your Square, Heart, or Arch frame with an even, rounded outer border.

+ Choose Photo
2D Crop Mask Square
Photo Zoom100%
← LeftMove PhotoRight →
0%
↑ UpMove PhotoDown ↓
0%

Controls background areas not covered by your photo. Unchecked = Solid White PLA (blocks light). Checked = Thin Shell (lets light shine through).

2. Shade Dimensions & Curve

Millimeters (mm)
Night Light Width 75 mm
Night Light Height 75 mm
Wrap-Around Curve 45°

Bends left & right edges backward around the LED bulb (0° = Flat)

Frame Border Width 4.0 mm
📐 Best Photo Ratio: 1:1 (Square) — Ideal size: 1500 × 1500 px (for 75 × 75 mm shade). At a 45° wrap curve, the sides bend gently back (73.1 mm front span) — keep key subjects centered.

3. Reinforced Slide-In Base

Deep Root Weld

Deep-Weld Slide-In Slot Plate

Generates a sturdy horizontal bottom plate (3.2 mm thick at default settings) that penetrates deeply into the solid bottom border of the lithophane with a tapered root footing so the joint prints as one solid piece with zero overhangs.

Slot Width 17.0 mm
Slot Depth 17.0 mm
Adapter Thickness 2.0 mm
Light → Lithophane 30.0 mm

4. Lithophane Thickness

★ White PLA Ready
★ Recommended Print Settings: Print standing vertically on the flat base adapter in white PLA with 100% infill (or 999 walls) and 0.12–0.16 mm layer height. Deep-weld root requires zero supports!
Min (Brightest) 0.5 mm
Max (Darkest) 2.8 mm
Triangles: -- Size: 75 × 75 × 41.3 mm
Glow 110%
Left-Drag: Orbit 360° • Scroll: Zoom • Click Top / Slot View or Side Profile to inspect the reinforced slide-in adapter
✓ Integrated Curved Root • True 2.0mm Slide-In Tongue