1. Christmas Pattern & Photo

Upload Your Holiday Photo (JPG, PNG, WebP)

Automatically contoured to your Christmas Tree, Star, or Gift Present frame with raised borders.

+ Choose Photo
2D Crop Mask Xmas Tree
Photo Zoom100%
← LeftMove PhotoRight →
0%
↑ UpMove PhotoDown ↓
0%

Controls background areas not covered by your photo. Unchecked = Solid White PLA (blocks light). Checked = Thin Shell (lets light shine through).

2. Shade Dimensions & Curve

Millimeters (mm)
Night Light Width 75 mm
Night Light Height 85 mm
Wrap-Around Curve 45°

Bends left & right edges backward around the LED bulb (0° = Flat)

Frame Border Width 4.0 mm
📐 Best Photo Ratio: 1:1 (Square) — Ideal size: 1500 × 1500 px (for 75 × 75 mm shade). At a 45° wrap curve, the sides bend gently back (73.1 mm front span) — keep key subjects centered.

3. Reinforced Slide-In Base

Curved Root + Deep Weld

Curved Rear Root & Deep Weld

Generates a sturdy flat bottom plate (2.0 mm thick) with deep root penetration into the lithophane wall, a curved integral rear haunch, and a wider front weld designed to improve joint durability.

Slot Width 17.0 mm
Slot Depth 17.0 mm
Adapter Thickness 2.0 mm
Light → Lithophane 30.0 mm

4. Lithophane Thickness

★ White PLA Ready
★ Recommended Print Settings: Print standing vertically on the flat base adapter in white PLA with 100% infill (or 999 walls) and 0.12–0.16 mm layer height. Integrated curved rear haunch and thicker root match the tested reinforced night-light V2 geometry.
Min (Brightest) 0.5 mm
Max (Darkest) 2.8 mm
Triangles: -- Size: 75 × 85 × 41.3 mm
Glow 110%
Left-Drag: Orbit 360° • Scroll: Zoom • Click Top / Root View or Side Profile to inspect the curved rear reinforcement
✓ Deep Root Overlap + Curved Rear Haunch + 2.0mm Tongue